Plastic HDPE double station extrusion blow molding machine

Maintenance method of Plastic HDPE double station extrusion blow molding machine

The maintenance of Plastic HDPE 2 colors kettle double station extrusion blow molding machine

is an indispensable link after the long-term use of the blow molding machine. When the double station blow molding machine workers use the blow molding machine daily, they should pay attention to the maintenance and daily maintenance of the blow molding machine to ensure the normal operation of the blow molding machine.

Maintenance and daily maintenance of double station extrusion blow molding machine：

1.Before starting each shift, add lubricating oil to each moving part.

2.Check whether the high-pressure air source, low-pressure air source, power supply, water source and all components are normal.

3.When the double station blow molding machineis running, pay close attention to whether there is abnormal noise in the machine, so as to detect it as soon as possible, stop it in time, and solve it as soon as possible.

4.In case of emergency, press the emergency stop button to brake in an emergency. Then according to the situation on site, analyze the reasons, find out the problems, and solve them quickly.

5.After the Plastic HDPE 2 colors kettle double station extrusion blow molding machineis in normal operation, do not put any part of the body into the machine to avoid being hurt by the manipulator. If the machine has abnormal noise, you can observe it after decelerating.

6.After the normal production of the Plastic HDPE double station extrusion blow molding machine, the operator should observe the quality of the bottle at any time to avoid voltage fluctuation or other reasons affecting the quality of the blow molding.

7.When the blow molding equipment is repaired, you can press the fault repair button on the screen to ensure safe repair. If you need to manually observe the movement of each cavity, pay attention to the position of the robot. At the same time, it is necessary to know the function of the individual button, and then operate it to ensure that misuse causes trouble.

8.After the blow molding machine is repaired, it is necessary to clean up tools and screws, so as not to be left in the machine and affect the normal operation of the machine.