Single Station extrusion blow molding machine china

What causes the unstable operation of the Single Station extrusion blow molding machine china?

1.The control system of the extrusion blow molding machine chinais unstable

As we all know, the operation and production of the entire blow molding machine equipment are controlled by the control system, which directs every step of the process and every action of the equipment. Before starting production, we input the corresponding process production parameters into the control system, so that the control system can accurately command and control each step of production. If the blow molding machine is not equipped with a suitable control system, it will cause the control system to work unstable and affect the operation of the blow molding machine. Once the blow molding machine equipment used by you has the problem of unstable operation, you can check whether the control system of the blow molding machine is stable.

2.The production pressure of the blow molding machine chinais unstable

The pressure mentioned here has two aspects: the clamping force and the pressure value of the air compressor. No matter which aspect of these two data has a problem, the pressure value will fluctuate and affect the production of the Good Price plastic Single Station extrusion blow molding machine china. Generally, when such problems occur, everyone The problem can be solved from three aspects: the leakage of the oil cylinder, the wear of the hydraulic pump and the pressure relief of the solenoid valve.

Everyone will involuntarily think that the unstable operation of the Single Station extrusion blow molding machine china means that the whole equipment is not good. In fact, everyone needs to understand that a blow molding machine is composed of multiple components and supporting facilities. In a link, implement the corresponding solution.