5 consequences of blow molding machine temperature being too high

During the operation of the automatic blow molding machine, the temperature problem is the most important, but it is also easy to be ignored. Today I will explain to you what are the consequences of the overheating of the automatic jerry can blow moulding machine? What is the loss of the machine?

1. It will cause the rubber seal of the blow molding machine to leak and shorten the service life.
2. The temperature of the hollow blow molding machine is too high, which will accelerate the deterioration of the oil, precipitate asphalt substances, and block the filter screen, resulting in difficulty in pump oil suction, pump wear, noise and leakage, reducing the volumetric efficiency of the pump, reducing the oil output, and shortening To ensure the service life of the components, the line speed.
3. Excessive temperature of the blow molding machine will also cause thermal changes in the machine, and the moving parts in the hydraulic components cannot be well matched, resulting in a smaller fit gap, action failure, and affecting the transmission accuracy of the hydraulic system.
4. The reduction of oil viscosity will cause the oil film of the sliding valve and other moving parts to become thinner or broken, and the friction will increase, causing serious wear and tear.
5. The oil pressure decreases, and the air flows out to generate bubbles, which affects the normal operation of the plastic hollow blow molding machine.

The consequences of excessive blow molding machine temperature are the above five reasons. Understanding the hazards caused by overheating of blow molding machines is the main effect of hydraulic systems and components. The hydraulic system is an important part of the hollow blow molding machine. The operation of the blow molding machine cannot be separated from the auxiliary machines and components of the blow molding machine, and it needs to cooperate with each other to complete the entire production process of the blow molding machine product.

YSD Machinery is china blow molding machine factory and continuous extrusion and storage type blow molding equipment research and development, design, production manufacturer, the main technical and management personnel have more than 20 years of experience, can provide automation comprehensive tailor-made services according to the needs of customers in different industries: Determination of the preliminary project plan, equipment selection, supporting design of the automated production line and provision of peripheral auxiliary equipment, customer employee training, and equipment after-sales service. The company’s machines are suitable for PE, PP, PVC, PS, PETG, EVA, EVOH, ABS, TPE, TPU, PA, K materials, rubber and plastics, etc. The formed products are widely used in cosmetics and washing, food, medicine, pesticides, Single-layer or multi-layer packaging containers for chemical and lubricating oil drums are also widely used in industries such as toys, lighting, Christmas ornaments, stationery, tool boxes, trays, automobile pipes, water tanks, and sports cups.